D-Sub Configurator For Standard Mounting
Please Configure Your D-Sub Connector In Sequential Order To Create The Correct Part Number.
Series :
--- Select ---
P - Monoblock Insulator
D - Doubleblock Insulator
E - EMI Shielded Insulator
H - High Temperature Insulator
N - Non-Magnetic D-Sub Connector
Insulator Type :
--- Select ---
11 - 1W1
22 - 2W2
33 - 3W3
44 - 4W4
55 - 5W5
66 - 6W6
77 - 7W7
88 - 8W8
51 - 5W1
72 - 7W2
94 - 9W4
111 - 11W1
133 - 13W3
172 - 17W2
211 - 21W1
136 - 13W6
175 - 17W5
214 - 21W4
2A4 - 21WA4
253 - 25W3
272 - 27W2
247 - 24W7
364 - 36W4
432 - 43W2
471 - 47W1
Connector Gender :
--- Select ---
P - Plug
R - Receptacle
D - Dimpled (Indented) Shell (Plug Only)
RoHS Compliance :
--- Select ---
RoHS
Non-RoHS
Mounting Configuration :
Hardware Specs
*
-
--- Select ---
0 - 0.120 Diameter Through Hole (Rivet, Standard)
A - 0.165 Through Hole (Tab)
B - #4-40 Clinch Nut
C - Straight #4-40 Swaged Standoff Fastener
D - Dual Float Mount
E - #4-40 Standoff, Rt. Angle Bracket W/ 0.420 Hole Location
F - #4-40 Standoff, Rt. Angle Bracket W/ 0.340 Hole Location
G - #4-40 Standoff, Rt. Angle Bracket W/ 0.420 Hole Location & Push-On Fastener Board Lock
H - #4-40 Standoff, Rt. Angle Bracket W/ 0.340 Hole Location & Push-On Fastener Board Lock
J - Internal D-Sub Guide Pin W/ Straight #4-40 Swaged Standoff Fastener (Mates W/ K, L, M, N)
K - Internal D-Sub Guide Bushing W/ Rt. Angle Bracket W/ 0.420 Or 0.395 Hole Location
L - Internal D-Sub Guide Bushing W/ Rt. Angle Bracket W/ 0.340 Hole Location
M - Internal D-Sub Guide Bushing W/ Rt. Angle Bracket W/ 0.420 Or 0.395 Hole Location & Push-On Fastener Board Lock
N - Internal D-Sub Guide Bushing W/ Rt. Angle Bracket W/ 0.340 Hole Location & Push-On Fastener Board Lock
P - Screw Lock Kit (Male Screw Retainer)
Q - Screw Lock Kit (Female Screw Lock)
R - Ground Strap
S - Loaded Guide Pin Plate
T - Loaded Reversed Guide Pin Plate
U - Thumb Screw (China Only)
X - #4-40 Thru Swaged Standoff (China Only)
Y - Alignment Plate (China Only)
Note: Contact Factory For Other Hardware Options That Are Not Listed On Hardware Specs List.
Signal Contact Modifier :
Style -
--- Select ---
Straight
Right
Solder Cup
Diameter -
--- Select ---
Board Thickness -
--- Select ---
Size 8 Contact Modifier :
Series -
--- Select ---
--- Empty ---
- 50 Ohm Coax (0.030" Center Pin)
- Standard Coax (0.040" Center Pin)
- PkZ Coax
- 75 Ohm Coax
- High Voltage
- High Power
Specs -
--- Select ---
Finish :
Signal Contact -
--- Select ---
A - 0.000050 Gold Over Nickel
B - 0.000030 Gold Over Nickel (Standard)
C - 0.000050 Gold Over Copper
D - 0.000030 Gold Over Copper
Size 8 Contact -
--- Select ---
Shell -
--- Select ---
1 - Yellow Chromate Over Zinc (Standard)
2 - Yellow Chromate Over Cadmium
3 - Tin (Regular & Alternate RoHS)
Ordering Part Number